Kentaro KUDO 研究室

AI 要約（直近 5 年の研究成果）

※ AI（Claude）が、公開されている論文要旨から研究の問い・手法・主要な発見を事実情報として抽出・再構成して自動生成しています。誤りを含む可能性があるため、正確性は研究室公式情報でご確認ください。

研究成果（12 件）

• [2026] Simulation of orientation behavior of plate-like particles in powder rolling based on finite element analysis of strain history
  DOI: https://doi.org/10.1299/mej.26-00026
• [2025] Combined PFM/DEM Analysis of Sintering Behavior of Powder Mixtures with Dispersed/Aggregated Particle Structures in Non-Reactive System
  DOI: https://doi.org/10.2497/jjspm.15a-t3-06
• [2025] Evaluation and Suppression of Porosity in Gas-atomized Powders
  DOI: https://doi.org/10.2497/jjspm.14c-sis1-02
• [2025] DIC Analysis of Large-deflection deformation during Sintering of MIM Compacts
  DOI: https://doi.org/10.2497/jjspm.15d-t8-05
• [2025] Tensile Properties of Fe-Cr and Fe-(Cr, Mn) Sintered Steels Applied by Low-Pressure Carburisation
  DOI: https://doi.org/10.2497/jjspm.14f-t12-04
• [2024] Simulation of Anisotropic Sintering of Elliptical Particles by Combined PFM/DEM Approach
  DOI: https://doi.org/10.2497/jjspm.24-00011
• [2023] Improvement of Fatigue Strength of Injection Molded Ti-6Al-4V Alloys and Elucidation of Controlling Factors in Fatigue Strength
  DOI: https://doi.org/10.2497/jjspm.70.319
• [2023] Quantitative estimation of contribution of pore size and the distance between nearest neighbour pores on high cycle fatigue (HCF) crack initiation in Ti-6Al-4V MIM-sintered materials
  DOI: https://doi.org/10.1016/j.ijfatigue.2023.107557
• [2022] Understanding The Effect Of Process Parameters On Three-dimensional Pore Configurations And Mechanical Properties Of Laser Additive Manufactured Ti Using Synchrotron X-ray Computed Tomography And Homology
  DOI: https://doi.org/10.59499/wp225369761
• [2021] Effect of carburized atmosphere on mechanical strength of Fe-Cr sintered material

科研費（0 件）

まだデータがありません（KAKEN 取り込み後に表示）。

所属学会・役職（0 件）

まだデータがありません（学会データ連携後に表示）。