Ammar H. Elsheikh 研究室

主宰者：Ammar H. Elsheikh

東京工業大学

AI 要約（直近 5 年の研究成果）

要約はまだ生成されていません。

※ AI（Claude）が、公開されている論文要旨から研究の問い・手法・主要な発見を事実情報として抽出・再構成して自動生成しています。誤りを含む可能性があるため、正確性は研究室公式情報でご確認ください。

外部リンク

研究成果（100 件）

[2025] Comprehensive investigation for enhanced performance of pyramid solar still using suspended trays, external condensation, and nano-enhanced thermal storage
DOI: https://doi.org/10.1016/j.tsep.2025.103878
[2025] Enhancing joint efficiency in friction stir welding of PA66 using an induction-heated threaded pin and glass fiber reinforcement
DOI: https://doi.org/10.1016/j.jmrt.2025.06.193
[2025] Enhancing the performance of stepped solar stills: A comprehensive study on design optimization, material integration, and techno-economic feasibility
DOI: https://doi.org/10.1016/j.solmat.2025.113784
[2025] Enhancing tubular solar still productivity: A novel rotational absorber, ultrasonic atomizer, and hygroscopic fabric integration
DOI: https://doi.org/10.1016/j.solmat.2025.113622
[2025] Modelling distillate output of a solar distiller with eco-friendly wood-based steam generation basin using machine learning model and starling murmuration optimizer
DOI: https://doi.org/10.1016/j.ijft.2025.101179
[2025] A synergistic approach to material analysis and power source engineering in ultrasonic welding of polymers
DOI: https://doi.org/10.1177/09544054251318078
[2025] Influence of air velocity on enhancing heat transfer rate in phase change materials for efficient device temperature control
DOI: https://doi.org/10.1016/j.heliyon.2025.e43003
[2025] A framework for integrating sustainable production practices along the product life cycle
DOI: https://doi.org/10.1016/j.indic.2025.100606
[2025] Advanced machine learning-based prediction of biogas production boosted by functionalized nanomaterials using the snow geese algorithm
DOI: https://doi.org/10.1016/j.jece.2025.117262
[2025] Performance prediction of tubular solar air heater with finned semi-Cylindrical absorber and swirl flow using Kolmogorov-Arnold networks and Walrus Optimizer
DOI: https://doi.org/10.1016/j.solmat.2025.113726

続きを表示（残り 90 件）

[2025] Kerf geometry prediction and optimization in laser cutting of basalt fiber reinforced polymer composites using decision tree and coati optimization algorithm
DOI: https://doi.org/10.1016/j.rineng.2025.105514
[2025] Friction reduction and wear behavior of ZnO/SnS-reinforced Fe3Al composites synthesized via spark plasma sintering
DOI: https://doi.org/10.1016/j.jmrt.2025.12.083
[2025] Optimization and assessment of self-healing thick E-glass fiber reinforced epoxy composites using microencapsulated healing agents
DOI: https://doi.org/10.1007/s00289-025-06204-5
[2025] Optimizing a solar-driven hybrid desalination-power plant with parabolic trough collectors, multi-stage flash, and reverse osmosis: Mathematical modeling and artificial neural network-based predictive study
DOI: https://doi.org/10.1016/j.seppur.2025.136162
[2025] Hydrogen embrittlement in storage tank materials and welded joints
DOI: https://doi.org/10.1016/j.mtsust.2025.101282
[2025] Sensor-assisted modeling and prediction of arc dynamics in MIAB welding using Kolmogorov–Arnold Networks and exponential-trigonometric optimization
DOI: https://doi.org/10.1016/j.apples.2025.100264
[2025] Sustainable turning of AISI 316 stainless steel using copper oxide nanoparticle-enriched sunflower oil: Experimental evaluation and machine learning-based prediction of surface roughness
DOI: https://doi.org/10.1016/j.rineng.2025.106921
[2025] Performance enhancement of a modified spherical solar still via corrugated absorber, jute wick, preheated feedwater, and integrated condenser
DOI: https://doi.org/10.1016/j.psep.2025.107718
[2025] Modelling and optimization of an inverted pyramid solar still using ANFIS-PSO: predictive analysis of water production, energy, and exergy efficiency
DOI: https://doi.org/10.1016/j.seppur.2025.134492
[2024] Development of Biocomposite Food Packaging Coating Material with Silane-treated Nanosilica and Grape Seed Oil Blended Vinyl Ester
DOI: https://doi.org/10.1007/s12633-024-03054-0
[2024] Modeling of a hybrid stirling engine/desalination system using an advanced machine learning approach
DOI: https://doi.org/10.1016/j.csite.2024.104645
[2024] Productivity prediction of a spherical distiller using a machine learning model and triangulation topology aggregation optimizer
DOI: https://doi.org/10.1016/j.desal.2024.117744
[2024] Innovative configurations for spherical solar distillation: Ball rotation and preheating for improved productivity
DOI: https://doi.org/10.1016/j.csite.2024.104489
[2024] Harnessing fluorescence resonance energy transfer for improved solar still performance with zinc oxide nanoparticles and activated carbon
DOI: https://doi.org/10.1016/j.apmt.2024.102196
[2024] Innovative solar distillation system with prismatic absorber basin: Experimental analysis and LSTM machine learning modeling coupled with great wall construction algorithm
DOI: https://doi.org/10.1016/j.psep.2024.04.063
[2024] Characterization of FeCoNiCr high-entropy alloys manufactured by powder metallurgy technique
DOI: https://doi.org/10.1016/j.jmrt.2024.03.054
[2024] Improvement of the performance of hemispherical distillers through passive and active techniques
DOI: https://doi.org/10.1016/j.solener.2024.112409
[2024] Erosion-corrosion failure analysis of the elbow pipe of steam distribution manifold
DOI: https://doi.org/10.1016/j.engfailanal.2024.108177
[2024] Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder
DOI: https://doi.org/10.30919/esmm1161
[2024] A technical appraisal of solar photovoltaic-integrated single slope single basin solar still for simultaneous energy and water generation
DOI: https://doi.org/10.1016/j.csite.2024.104032
[2024] Optimization of joint strength in friction stir welded wood plastic composites using ANFIS and Cheetah Optimizer
DOI: https://doi.org/10.1016/j.jmrt.2024.12.257
[2024] Tribological characteristics of porous 3D-printed PLA+ with anaerobic methacrylate self-impregnated lubricant
DOI: https://doi.org/10.1007/s40964-024-00903-7
[2024] Quantitative Evaluation of Deformation Mechanisms in Austenitic Hadfield Steel under Different Strain Rates
DOI: https://doi.org/10.1002/srin.202400714
[2024] Performance enhancement of a modified solar still with inverted pyramid aluminum basin geometry: Experimental optimization, thermal, and economic assessment
DOI: https://doi.org/10.1016/j.psep.2024.11.104
[2024] Experimental investigation on the weldability of wood-plastic composites by friction stir welding using a self-reacting double-stationary shoulder tool
DOI: https://doi.org/10.1016/j.rineng.2024.103446
[2024] Impact of nano-Y2O3 on the physical, microstructure, and mechanical characteristics of Cu composite fabricated via powder metallurgy
DOI: https://doi.org/10.1016/j.jallcom.2024.177042
[2024] Revolutionizing dye-sensitized solar cells: Chassalia curviflora fruit extract as photosensitizer and charge recombination inhibitor
DOI: https://doi.org/10.1016/j.inoche.2024.113292
[2024] Effect of air layer on PCMs melting process inside a spherical container: A numerical investigation
DOI: https://doi.org/10.1016/j.rineng.2024.103088
[2024] Enhancing the melting rate of RT42 paraffin wax in a square cell with varied copper fin lengths and orientations: A numerical simulation
DOI: https://doi.org/10.1016/j.ijft.2024.100877
[2024] Examination of Minimum Quantity Lubrication Performance in the Hard Turning of AISI/SAE 1060 High-Carbon Steel
DOI: https://doi.org/10.1007/s11665-024-10070-z
[2024] Enhancing desalination performance of a stepped solar still using nano-enhanced phase change material and condenser integration
DOI: https://doi.org/10.1016/j.solmat.2024.113141
[2024] Enhanced water production in pyramid solar stills: Utilizing suspended trays, fogging system, and forced condensation
DOI: https://doi.org/10.1016/j.solmat.2024.113125
[2024] Graphene nanoplatelets-water nanofluids: A sustainable approach to enhancing Ti-6Al-4V grinding performance through minimum quantity lubrication
DOI: https://doi.org/10.1016/j.triboint.2024.110145
[2024] Quantitative analysis of heat and mass transfer in MoS2-Al2O3/EG hybrid flow between parallel surfaces with suction/injection by numerical modeling of HPM method
DOI: https://doi.org/10.1016/j.ijft.2024.100819
[2024] An investigation of deep learning approaches for efficient assembly component identification
DOI: https://doi.org/10.1186/s43088-024-00537-2
[2024] Boosted Nutcracker optimizer and Chaos Game Optimization with Cross Vision Transformer for medical image classification
DOI: https://doi.org/10.1016/j.eij.2024.100457
[2024] Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory
DOI: https://doi.org/10.1177/09544062241256589
[2024] Geothermal and solar energy in water desalination and power generation: comprehensive review
DOI: https://doi.org/10.1007/s12667-024-00685-5
[2023] Performance improvement of single and double effect solar stills with silver balls/nanofluids for bioactivation: An experimental analysis
DOI: https://doi.org/10.1016/j.solener.2023.05.012
[2023] Machine learning-aided modeling for predicting freshwater production of a membrane desalination system: A long-short-term memory coupled with election-based optimizer
DOI: https://doi.org/10.1016/j.aej.2023.12.012
[2023] Performance improvement of a modified distiller with V-corrugated absorber and heat pump in different configurations: A thermoenviroeconomic assessment
DOI: https://doi.org/10.1016/j.tsep.2023.102301
[2023] Analysis of overcurrent protective relaying as minimum adopted fault protection for small-scale hydropower plants
DOI: https://doi.org/10.1007/s13762-023-05284-y
[2023] Experimental investigation and machine learning modeling using LSTM and special relativity search of friction stir processed AA2024/Al2O3 nanocomposites
DOI: https://doi.org/10.1016/j.jmrt.2023.11.155
[2023] Influence of nanoparticles addition on the fatigue failure behavior of metal matrix composites: Comprehensive review
DOI: https://doi.org/10.1016/j.engfailanal.2023.107751
[2023] Prediction of milled surface characteristics of carbon fiber-reinforced polyetheretherketone using an optimized machine learning model by gazelle optimizer
DOI: https://doi.org/10.1016/j.measurement.2023.113627
[2023] Kerf characteristics during CO2 laser cutting of polymeric materials: Experimental investigation and machine learning-based prediction
DOI: https://doi.org/10.1016/j.jestch.2023.101519
[2023] Tension and bending behaviors of 3D printed PLA+ at different printing parameters
DOI: https://doi.org/10.1142/s2424913023410047
[2023] Modelling of thermo-hydraulic behavior of a helical heat exchanger using machine learning model and fire hawk optimizer
DOI: https://doi.org/10.1016/j.csite.2023.103294
[2023] Chemical potential of different phases inside the pyramid stepped basin solar still through Gibbs free energy
DOI: https://doi.org/10.1016/j.csite.2023.103277
[2023] Enhancement and prediction of a stepped solar still productivity integrated with paraffin wax enriched with nano-additives
DOI: https://doi.org/10.1016/j.csite.2023.103215
[2023] A new recycled high-impact polystyrene-rice straw composite: eco-friendly fabrication and characterization
DOI: https://doi.org/10.1007/s13762-023-05039-9
[2023] Using Direct Solar Energy Conversion in Distillation via Evacuated Solar Tube with and without Nanomaterials
DOI: https://doi.org/10.3390/pr11061734
[2023] Performance prediction of aluminum and polycarbonate solar stills with air cavity using an optimized neural network model by golden jackal optimizer
DOI: https://doi.org/10.1016/j.csite.2023.103055
[2023] Performance evaluation of a solar air heater with staggered/longitudinal finned absorber plate integrated with aluminium sponge porous medium
DOI: https://doi.org/10.1016/j.jobe.2023.106841
[2023] Hybridizing solar dish Stirling power system with single-effect desalination for sustainable electricity and freshwater co-generation: Mathematical modeling and performance evaluation
DOI: https://doi.org/10.1016/j.csite.2023.102997
[2023] Thermal performance enhancement of a modified pyramid distiller using different modifications with low-cost materials
DOI: https://doi.org/10.1016/j.seta.2023.103191
[2023] Cooling and lubrication techniques in grinding: A state-of-the-art review, applications, and sustainability assessment
DOI: https://doi.org/10.1016/j.cja.2023.03.026
[2023] Surface characterization of SAE 304 after WED cutting: an experimental investigation and optimization
DOI: https://doi.org/10.1016/j.jmrt.2023.02.183
[2023] Impact of Using Tungsten, Cobalt, and Aluminum Additives on the Tribological and Mechanical Properties of Iron Composites
DOI: https://doi.org/10.3390/cryst13030395
[2023] Applications of machine learning in friction stir welding: Prediction of joint properties, real-time control and tool failure diagnosis
DOI: https://doi.org/10.1016/j.engappai.2023.105961
[2023] Solar desalination/purification (solar stills, humidification-dehumidification, solar disinfection) in high altitude during COVID19: Insights of gastrointestinal manifestations and systems’ mechanism
DOI: https://doi.org/10.1016/j.hazadv.2023.100259
[2023] Novel Design of Double Slope Solar Distiller with Prismatic Absorber Basin, Linen Wicks, and Dual Parallel Spraying Nozzles: Experimental Investigation and Energic–Exergic-Economic Analyses
DOI: https://doi.org/10.3390/w15030610
[2023] Investigation on the Performance of Coated Carbide Tool during Dry Turning of AISI 4340 Alloy Steel
DOI: https://doi.org/10.3390/ma16020668
[2023] Water distillation tower: Experimental investigation, economic assessment, and performance prediction using optimized machine-learning model
DOI: https://doi.org/10.1016/j.jclepro.2023.135896
[2023] Predicting Characteristics of Dissimilar Laser Welded Polymeric Joints Using a Multi-Layer Perceptrons Model Coupled with Archimedes Optimizer
DOI: https://doi.org/10.3390/polym15010233
[2022] In Vitro Degradability, Microstructural Evaluation, and Biocompatibility of Zn-Ti-Cu-Ca-P Alloy
DOI: https://doi.org/10.3390/nano12081357
[2022] Predicting Shale Volume from Seismic Traces Using Modified Random Vector Functional Link Based on Transient Search Optimization Model: A Case Study from Netherlands North Sea
DOI: https://doi.org/10.1007/s11053-022-10049-4
[2022] Predicting the yield of stepped corrugated solar distiller using kernel-based machine learning models
DOI: https://doi.org/10.1016/j.applthermaleng.2022.118759
[2022] Wind power prediction using random vector functional link network with capuchin search algorithm
DOI: https://doi.org/10.1016/j.asej.2022.102095
[2022] Engine oil quality deterioration estimation using an integrated sensory system
DOI: https://doi.org/10.1177/09544089221135629
[2022] Welding of Low Carbon Steel Tubes Using Magnetically Impelled Arc Butt Welding: Experimental Investigation and Characterization
DOI: https://doi.org/10.3390/met12111965
[2022] A New Approach for Failure Modes, Effects, and Criticality Analysis Using ExJ-PSI Model—A Case Study on Boiler System
DOI: https://doi.org/10.3390/app122211419
[2022] A coupled artificial neural network with artificial rabbits optimizer for predicting water productivity of different designs of solar stills
DOI: https://doi.org/10.1016/j.advengsoft.2022.103315
[2022] Performance prediction of a reverse osmosis unit using an optimized Long Short-term Memory model by hummingbird optimizer
DOI: https://doi.org/10.1016/j.psep.2022.10.071
[2022] Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique
DOI: https://doi.org/10.3390/coatings12111612
[2022] A Quantum-Based Chameleon Swarm for Feature Selection
DOI: https://doi.org/10.3390/math10193606
[2022] The performance enhancement of solar cooker integrated with photovoltaic module and evacuated tubes using ZnO/Acalypha Indica leaf extract: response surface study analysis
DOI: https://doi.org/10.1007/s11356-022-23126-1
[2022] Microstructure, Mechanical Characteristics, and Wear Performance of Spark Plasma Sintered TiB2–Si3N4 as Affected by B4N Doping
DOI: https://doi.org/10.3390/ma15207096
[2022] Augmentation and prediction of wick solar still productivity using artificial neural network integrated with tree–seed algorithm
DOI: https://doi.org/10.1007/s13762-022-04414-2
[2022] Influences of tool electrodes on machinability of titanium α- β alloy with ISO energy pulse generator in EDM process
DOI: https://doi.org/10.1016/j.aej.2022.07.059
[2022] Applications of TiO2/Jackfruit peel nanocomposites in solar still: Experimental analysis and performance evaluation
DOI: https://doi.org/10.1016/j.csite.2022.102292
[2022] Analysis of large edge breakage of WC-Co cemented carbide tool blades emerging in precision grinding process
DOI: https://doi.org/10.1016/j.jmrt.2022.06.103
[2022] Performance enhancement and economic analysis of pyramid solar still with corrugated absorber plate and conventional solar still: A case study
DOI: https://doi.org/10.1016/j.csite.2022.101966
[2022] Performance prediction of solar still with a high-frequency ultrasound waves atomizer using random vector functional link/heap-based optimizer
DOI: https://doi.org/10.1016/j.advengsoft.2022.103142
[2022] The Influence of Boron Carbide on the Mechanical Properties and Bonding Strength of B4C/Nickel 63 Coatings of Brake Disc
DOI: https://doi.org/10.3390/coatings12050663
[2022] Predicting kerf quality characteristics in laser cutting of basalt fibers reinforced polymer composites using neural network and chimp optimization
DOI: https://doi.org/10.1016/j.aej.2022.04.032
[2022] Improving the performance of a hybrid solar desalination system under various operating conditions
DOI: https://doi.org/10.1016/j.psep.2022.04.044
[2022] Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives
DOI: https://doi.org/10.1016/j.aej.2022.04.029
[2022] Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions
DOI: https://doi.org/10.1007/s11356-022-20285-z
[2022] Investigation of mechanical properties of dual-fiber reinforcement in polymer composite
DOI: https://doi.org/10.1016/j.jmrt.2022.04.053

科研費（0 件）

まだデータがありません（KAKEN 取り込み後に表示）。

所属学会・役職（0 件）

まだデータがありません（学会データ連携後に表示）。

AI 要約（直近 5 年の研究成果）

外部リンク

関連研究室

研究成果（100 件）

科研費（0 件）

所属学会・役職（0 件）