Chieko Kuji 研究室

AI 要約（直近 5 年の研究成果）

※ AI（Claude）が、公開されている論文要旨から研究の問い・手法・主要な発見を事実情報として抽出・再構成して自動生成しています。誤りを含む可能性があるため、正確性は研究室公式情報でご確認ください。

研究成果（17 件）

• [2024] Clarification of shear deformation behavior in Fe–Si amorphous alloys by molecular dynamics
  DOI: https://doi.org/10.1016/j.matdes.2024.113566
• [2024] Acid resistance of hydroxyapatite dental films fabricated through powder jet deposition
  DOI: https://doi.org/10.1016/j.mtcomm.2024.109564
• [2023] 2D X-ray diffraction method for evaluating the local crystallization of Fe-based amorphous alloy ribbon induced by ultrashort pulsed laser local heating
  DOI: https://doi.org/10.1016/j.mtcomm.2023.107166
• [2023] Experimental study on the effect of the milling condition of an aluminum alloy on subsurface residual stress
  DOI: https://doi.org/10.1007/s00170-023-11921-0
• [2023] Comparison of the effects of submerged laser peening, cavitation peening and shot peening on the improvement of the fatigue strength of magnesium alloy AZ31
  DOI: https://doi.org/10.1016/j.jma.2023.04.004
• [2023] Relationship between blanking performance and microstructure of annealed Fe–Si–B–Cr amorphous alloy sheets
  DOI: https://doi.org/10.1016/j.precisioneng.2023.03.004
• [2023] Fabrication of temperature-selective thermal radiation surfaces utilizing surface texturing
  DOI: https://doi.org/10.1016/j.precisioneng.2023.03.003
• [2023] Effect of local heating by ultrashort pulsed laser on Fe–Si–B–Cr amorphous alloys and its influence on blanking machinability
  DOI: https://doi.org/10.1016/j.precisioneng.2023.02.007
• [2023] Mechanical Surface Treatment of Titanium Alloy Ti6Al4V Manufactured by Direct Metal Laser Sintering Using Laser Cavitation
  DOI: https://doi.org/10.3390/met13010181
• [2023] Influence of the Impact Angle on Machining in Powder Jet Processing
  DOI: https://doi.org/10.20965/ijat.2023.p0005

科研費（0 件）

まだデータがありません（KAKEN 取り込み後に表示）。

所属学会・役職（0 件）

まだデータがありません（学会データ連携後に表示）。