Takahito Nishimura 研究室

主宰者：Takahito Nishimura

東京工業大学

AI 要約（直近 5 年の研究成果）

要約はまだ生成されていません。

※ AI（Claude）が、公開されている論文要旨から研究の問い・手法・主要な発見を事実情報として抽出・再構成して自動生成しています。誤りを含む可能性があるため、正確性は研究室公式情報でご確認ください。

外部リンク

研究成果（100 件）

[2025] Suppression Technique of Sputtering Damage for High-Efficient Perovskite/ CIGSe Tandem Solar Cells
[2025] Structural investigation of the back contact in CIGSe solar cells with Li-doped NiO hole transport layer
DOI: https://doi.org/10.35848/1347-4065/adcbb1
[2025] Structural investigation of the back contact in CIGSe solar cells with Li-doped NiO hole transport layer
[2025] Peeling‐Off Process for the Fabrication of Flexible, Lightweight Bifacial Perovskite/Cu(In,Ga)Se2 Tandem Solar Cells
DOI: https://doi.org/10.1002/ente.202500020
[2025] ミストCVD法を用いたZn(O, S)薄膜の作製および組成制御
[2025] Ag前駆体層による低温成長CIGSe太陽電池の性能向上
[2025] FTPS法を用いたカルコパライト系太陽電池の光吸収層評
[2025] Cu(In,Ga)S2におけるスタック型Cu-Ga/Inプリカーサ組成に関する研究
[2025] 圧力勾配スパッタ法により製膜したCIGSe太陽電池裏面コンタクト用LiドープNiO薄膜の特性
[2025] Study of the stacked Cu–Ga/In precursor for Cu(In,Ga)S2 solar cells
DOI: https://doi.org/10.35848/1347-4065/adb9ef

続きを表示（残り 90 件）

[2025] Study of the stacked Cu–Ga/In precursor for Cu(In,Ga)S2 solar cells
[2025] Impact of Ionic Conduction on Hysteresis and Long-Term Degradation in Perovskite Solar Cells
DOI: https://doi.org/10.1021/acsaem.4c01993
[2025] Device Characterization via Transient Model Involving VCu–VSe Complex for Cu(In,Ga)Se2 Solar Cells
[2025] Cu(In,Ga)S2太陽電池のバッファ層応用を目指したZnGeOの開発
[2025] Impact of MoSe2 Layer on Carrier Transport at the Back Contact in Cu(In,Ga)Se2 Solar Cells
[2025] Impact of Ionic Conduction on Hysteresis and Long-Term Degradation in Perovskite Solar Cells
[2025] Advancing CIGSe Solar Cell Efficiency Under Low-Temperature Deposition via Ag Additives
[2025] Direct sputtering deposition of Zn–Ge–O buffer with conduction band controllability for Cd-free and all-dry process Cu(In,Ga)S2 solar cells
[2024] Impacts of O2/(O2tAr) Flow Ratio on the Properties of Li-Doped NiO Thin Films Fabricated by Pressure-Gradient Radiofrequency Magnetron Sputtering
[2024] Hysteresis analysis in perovskite solar cells by considering ionic conduction
[2024] Study on the deposition process of metal precursors in Cu(In,Ga)S2
[2024] Development of Li-doped NiO Thin Films for Effective Hole Transport in CIGSe Solar Cells
[2024] CIGS太陽電池の正孔輸送層としてのNiO:Liの開発
[2024] Cu(In,Ga)Se2太陽電池におけるn層一体型Zn-Ge-Oの開発
[2024] Modification Technique of Back Junction for Cu(In,Ga)Se2 Solar Cells
[2024] ベイズ最適化を用いたCu(In,Ga)Se2光吸収層の構造設計
[2024] Fabrication of In2S3 and In–Ga–S Thin Films via Atmosphere-Controlled Fine-Channel Mist Chemical Vapor Deposition
[2024] ミストCVD法を用いた(In,Ga)2S3薄膜の作製
[2024] Cu(In,Ga)Se2太陽電池の高性能化に向けたベイズ最適化の適用
[2024] Development of Li-doped NiO Thin Film as a Hole Transport Layer for CIGS Solar Cells
[2024] Cu(In,Ga)Se2太陽電池における金属電極材料の検討
[2024] ミストCVD法を用いたIn2S3薄膜の作製
[2024] イオン伝導を考慮したペロブスカイト太陽電池のデバイス解析
[2024] Cu(In,Ga)S2における金属プリカーサ製膜工程に関する研究
[2024] Deposition of (In, Ga)2S3 thin film via mist CVD method under a controlled atmosphere
[2024] (Th2-P51-49) Fabrication of CsPb(Br0.45Cl0.55)3 photovoltaic power converters for optical wireless power transmission systems using NiOx hole transport layer
[2024] Optimum Electrical and Optical Properties of Transparent Conducting Oxide for Cu(In,Ga)Se2 Photovoltaic Module Applications
[2024] Fabrication of In2S3 and In–Ga–S Thin Films via Atmosphere‐Controlled Fine‐Channel Mist Chemical Vapor Deposition
DOI: https://doi.org/10.1002/pssr.202400258
[2024] Impacts of O2/(O2+Ar) Flow Ratio on the Properties of Li‐Doped NiO Thin Films Fabricated by Pressure‐Gradient Radiofrequency Magnetron Sputtering
DOI: https://doi.org/10.1002/pssa.202400497
[2024] Impact of MoSe 2 Layer on Carrier Transport at the Back Contact in Cu(In,Ga)Se 2 Solar Cells
DOI: https://doi.org/10.1109/jphotov.2024.3496479
[2023] Mechanism analysis of CuInS2 and Cu(In,Ga)S2 growth via KCN- and H2S-free process and solar-cell application
DOI: https://doi.org/10.35848/1347-4065/accb63
[2023] 大気開放型 CVD 法を用いた CIGS 太陽電池用 n 型バッファ層の開発
[2023] Cu(In,Ga)S2 太陽電池のための低電子親和力 Zn-Ge-O の開発
[2023] Mechanism analysis of CuInS2 and Cu(In,Ga)S2 growth via KCN- and H2S-free process and solar-cell application
[2023] Silver‐Doped Cu2(Sn,Ge)S3 Solar Cells
DOI: https://doi.org/10.1002/pssr.202300050
[2023] 大気開放型CVD法を用いたIn2S3の作製およびCIGSe太陽電池への応用
[2023] Development of n-type Zn(O, S) buffer layer deposited by open-air CVD method for Cu(In, Ga)Se2 solar cells
[2023] Theoretical and Experimental Optimization of Back Junction for Cu(In,Ga)Se2 Solar Cells
[2023] ベイズ最適化を用いた CIGS 太陽電池の最適設計
[2023] CIGS太陽電池のバルクおよび界面特性に対するAg添加の影響
[2023] 硫黄粉末を用いた硫化法によるCu(In,Ga)S2太陽電池の作製
[2023] In2S3 Thin Films via Open‐Air Chemical Vapor Deposition Using Indium‐Diethyldithiocarbamate: Deposition and Characterization
DOI: https://doi.org/10.1002/pssr.202300383
[2023] In2S3 Thin Films via Open-Air Chemical Vapor Deposition Using Indium-Diethyldithiocarbamate: Deposition and Characterization
[2023] Development of In2S3 buffer layer for Cu(In,Ga)Se2 solar cells by open-air CVD method
[2023] Systematic Analysis of Ag Addition Effects on Bulk and Interface Properties in CIGSe Solar Cells
[2023] Device Design for High-Efficient Cu(In,Ga)Se2 Solar Cells utilizing Bayesian Optimization
[2023] Optimum Electrical and Optical Properties of Transparent Conducting Oxide for Cu(In,Ga)Se2Photovoltaic Module Applications
DOI: https://doi.org/10.1002/pssa.202300641
[2023] Analysis of EBIC Time Variation with VSe–VCu Vacancy Complex in Cu(In, Ga)Se2 Solar Cells
[2023] Development of n-type Zn(O, S) buffer layer deposited by open-air CVD method for Cu(In, Ga)Se2 solar cells
DOI: https://doi.org/10.35848/1347-4065/acc954
[2023] Analysis of EBIC time-variation using 2D simulation including charge states in V Se–V Cu divacancy complex
DOI: https://doi.org/10.35848/1347-4065/acc7ad
[2023] カーネル法を用いた CIGS 太陽電池の最適設計
[2023] 大気開放型CVD法によるCu-S系化合物薄膜熱電変換材料の作製
[2023] Experimental and theoretical EBIC analysis for grain boundary and CdS/Cu (In, Ga)Se2 heterointerface in Cu (In, Ga)Se2 solar cells
DOI: https://doi.org/10.1002/pip.3673
[2023] Experimental and theoretical EBIC analysis for grain boundary and CdS/Cu(In,Ga)Se2 heterointerface in Cu(In,Ga)Se2 solar cells
[2022] Growth of Zn‐Ge‐O Thin‐Film as a Transparent Conductive Oxide Buffer Material for Chalcopyrite Solar Cell
DOI: https://doi.org/10.1002/crat.202200145
[2022] Cu-Se 化合物の熱電特性の評価
[2022] Analysis of EBIC time-variation using 2D simulation including charge states in VSe–VCu divacancy complex
[2022] Derived Conduction Band Offset by Photoelectron Yield Spectroscopy and Its Quantitative Number for Efficiency Enhancement of Flexible, Cd-Free, and All-Dry Process Zn1–xMgxO:Al/Zn1–xMgxO/Cu(In,Ga)(S,Se)2 Solar Cells
DOI: https://doi.org/10.1021/acsaelm.2c00227
[2022] Formation of Native Inx(O,S)yBuffer through Surface Oxidation of Cu(In,Ga)(S,Se)2Absorber for Significantly Enhanced Conversion Efficiency of Flexible and Cd‐Free Solar Cell by All‐Dry Process
DOI: https://doi.org/10.1002/solr.202200250
[2022] Mg Content Impact of a Sputtered Zn1–xMgxO:Al Transparent Electrode on Photovoltaic Performances of Flexible, Cd-Free, and All-Dry-Process Cu(In,Ga)(S,Se)2 Solar Cells
DOI: https://doi.org/10.1021/acsaem.1c03783
[2022] Physical and chemical aspects at the interface and in the bulk of CuInSe2-based thin-film photovoltaics
[2022] Development of n-type ZnS buffer layer deposited by atmospheric pressure MOCVD method for Cu(In,Ga)Se2 solar cells
[2022] Optimum Back Junction utilizing P-Type MoSe2:Nb Layer for Cu(In,Ga)Se2 Solar Cells
[2022] Zn-Ge-O thin-films as alternative n-type layers for chalcogenide solar cells
[2022] Growth mechanism and fabrication of pure sulfide CuIn(Ga)S2 solar cell by sulfurization
[2022] (Invited, Digital Presentation) Application of Transition Metal Dichalcogenides for Chalcopyrite Solar Cells
DOI: https://doi.org/10.1149/ma2022-0216829mtgabs
[2022] P‐Type Nb‐Doped MoS2Layer for Solar Cell Application
DOI: https://doi.org/10.1002/pssr.202200236
[2022] Impacts of 0D Cs4PbI6 phase in all-inorganic CsPbI3 perovskites on their physical, optical properties and photovoltaic performances
[2022] Impacts of 0D Cs4PbI6 phase in all-inorganic CsPbI3 perovskites on their physical, optical properties and photovoltaic performances
DOI: https://doi.org/10.1016/j.tsf.2022.139485
[2022] 硫黄粉末を用いた硫化法によるCu(In,Ga)S2の作製
[2022] 大気中MOCVD法によるCIGS太陽電池用ZnSバッファ層の作製
[2022] CIGS太陽電池モジュールの透明導電膜抵抗の解析
[2022] EBIC 法を用いたCu(In,Ga) Se2太陽電池の評価
[2022] Estimation of performance limit for bifacial single-junction solar cell
DOI: https://doi.org/10.1016/j.optlastec.2022.108500
[2022] Position Influence of Sputtered Zn1–xMgxO/Zn1–xMgxO:Al Layers in Flexible and Cd-Free Cu(In,Ga)(S,Se)2 Solar Cells
DOI: https://doi.org/10.1021/acsami.2c07716
[2022] Tunable‐Conduction‐Band In–Zn–O‐Based Transparent Conductive Oxide Deposited at Room Temperature
DOI: https://doi.org/10.1002/pssa.202200061
[2022] Long-term examinations up to 20 years of performance ratio and degradation rate of different-type photovoltaic modules at central part of Japan
DOI: https://doi.org/10.1016/j.ref.2022.12.003
[2021] Gaussian distribution of average photon energy and spectral gain and loss of several-type photovoltaic modules at different outdoor sites around the world
DOI: https://doi.org/10.1016/j.optcom.2021.127516
[2021] Device design for high-performance bifacial Cu(In,Ga)Se2 solar cells under front and rear illuminations
DOI: https://doi.org/10.1016/j.solener.2021.01.075
[2021] Impact of Auger recombination on performance limitation of perovskite solar cell
DOI: https://doi.org/10.1016/j.solener.2021.02.018
[2021] Effect of an Ohmic back contact on the stability of Cu(In,Ga)Se2-based flexible bifacial solar cells
DOI: https://doi.org/10.1063/5.0054235
[2021] Optimized bandgaps of top and bottom subcells for bifacial two-terminal tandem solar cells under different back irradiances
DOI: https://doi.org/10.1016/j.solener.2021.03.034
[2021] Accurate estimation of outdoor performance of photovoltaic module through spectral mismatch correction factor under wide range of solar spectrum
DOI: https://doi.org/10.1016/j.cap.2021.04.023
[2021] Peeling Technique by Two-Dimensional MoSe2 Atomic Layer for Bifacial-Flexible Cu(In, Ga)Se2 solar cells
DOI: https://doi.org/10.23919/am-fpd52126.2021.9499155
[2021] [Ga]/([Ga] plus [In]) profile controlled through Ga flux for performance improvement of Cu(In,Ga)Se2 solar cells on flexible stainless steel substrates
[2021] Theoretical impacts of single band gap grading of perovskite and valence band offset of perovskite/hole transport layer interface on its solar cell performances
DOI: https://doi.org/10.1016/j.solener.2021.11.072
[2021] [Ga]/([Ga]+[In]) profile controlled through Ga flux for performance improvement of Cu(In,Ga)Se2 solar cells on flexible stainless steel substrates
DOI: https://doi.org/10.1016/j.jallcom.2021.163276
[2021] CIS系太陽電池の現在とこれからの研究開発課題
[2021] Silver-alloyed wide-gap CuGaSe2 solar cells
DOI: https://doi.org/10.1016/j.solener.2021.10.055
[2021] Influence of Sputter Deposited Back-contact Thickness on Performance of Flexible and Bifacial Cu(In,Ga)Se2 Solar Cells
DOI: https://doi.org/10.7567/ssdm.2021.f-4-03

科研費（0 件）

まだデータがありません（KAKEN 取り込み後に表示）。

所属学会・役職（0 件）

まだデータがありません（学会データ連携後に表示）。

AI 要約（直近 5 年の研究成果）

外部リンク

関連研究室(8 件)

研究成果（100 件）

科研費（0 件）

所属学会・役職（0 件）